Samsung SGH-T499Y Hang in logo Done Flashing Solution

Samsung SGH-T499Y Hang Sa logo Done Flashing kay Octopus.

action taken

hard reset ko na muna but no lock.



late ko nanakita na iba pala ung model sa likod saka itong
nasa logo haha GT-S5570 tingin ko naiflash na ito but
mali ung FW kaya ganyan ung ng yari.





action taken DL ako ng FW sa support ng octopus para iflash
sa tamang Firmware

Press HOLD Volume Down + Power para mag downloading mode.
then connect usb port sa phone.



Bali 2nd attemp ko na po ito na iflash na interrupt po kasi sa una
ko na flash but ok naman sa 2nd na tapos ng maayos.

Code:

Welcome to Octopus Box Samsung software version 1.8.7
-----------------------------------------------------------------------------------
To connect SGH-T499Y phone you have to perform the following 
steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM6
Selected model: SGH-T499Y
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM12
Phone connection failed
Connecting to phone on COM6
Phone connection failed
Selected firmware file: SGH-T499Y_SW_SKG2.oct
Please switch your phone to the download mode and connect it to a 
PC.
To put SGH-T499Y phone into download mode you have to perform the 
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - "  + "Power" buttons.
Searching for a phone. Please wait...
Found phone on 
Firmware write started.
Writing mibib section...
mibib section has been written successfully.
Writing qcsbl section...
qcsbl section has been written successfully.
Writing oemsbl section...
oemsbl section has been written successfully.
Writing amss section...
amss section has been written successfully.
Writing arm11boot section...
arm11boot section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing system.rfs section...
system.rfs section has been written successfully.
Writing data.rfs section...
data.rfs section has been written successfully.
Writing csc.rfs section...
csc.rfs section has been written successfully.
Please, restart the phone to apply changes
Firmware writing successfully completed.