Thursday, May 30, 2013

Nokia C3-01 no power Done.


me tangap po ako c3-01 no power po dinala sa akin, totally vibrate lang po cia.
so gnawa ko software muna, salang ko sa ATF ayon nadetect kaso ayaw mag info so program kuna diritso,


ito napo ung logs..

Number of Image Files: 3


Code:
Processing Image File : 
rm640__07.51.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 303
Entry Point: 0x0267
Page Format : -1
MAX PAGE : 0x00020000

Processing Image File :
rm640__07.51.ppm_mr2
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 70
Entry Point: 0x0129
Page Format : -1
MAX PAGE : 0x00020000

Processing Image File :
rm640__07.51.image_mr2_059D6N7_008
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 296
Entry Point: 0x015A
Page Format : -1
MAX PAGE : 0x00020000



AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
ERROR: BOOTROM NOT DETECTED
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
READING BOOTROM

BootFlashModeDCT5Ex Succeded After 2 Tries
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 96 (0x60) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000003
ID DWORD 1 : 00000226
ID DWORD 2 : 00010007
ID DWORD 3 : 600C1921
ID DWORD 4 : 02031104
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00001051
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00001060
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 20B00019
ID DWORD 1 : C9D70344
ID DWORD 2 : 74A3DC37
ID DWORD 3 : DD7979EE
ID DWORD 4 : AE0BB6B3
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 91 6F 75 21 7F 32 08 12 48 B1 5C 38 DF C8 E8 1B
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : E693EF0D
CRC 1 : AC22615B

CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_2nd.fg
Secondary Loader Sent....

MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : C1
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0000
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 0098 ->
Device ID : 0030 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0131
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data : XSR 1.6

SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Flash De******or
Manufacturer Code : 0098
Device ID : 0030
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 08000000 (128 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00

CMT Algorithm Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_XSR17_alg.fg
Algorithm Loader Sent...

FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok

START READING RPL DATA
IMEI: 357019041375410
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!

NPC CERTIFICATE INFORMATION (CMT):
IMEI : 357019041375410
PRODUCT CODE : 059C5B2
WLAN ID : 78:CA:04:41:D0:1D
BLUETOOTH ID : 78:CA:04:41:81:FD
PUBLIC_ID : 20B00019C9D7034474A3DC37DD7979EEAE0BB6B3
PAPUB_KEYS_HASH: 5AA09885C97BF3B0F6783A6337506F9394F346EF
CCC CERTIFICATE INFORMATION (CMT):
PRODUCT CODE : 059C5B2
HWC CERTIFICATE INFORMATION (CMT):
PUBLIC_ID : 20B00019C9D7034474A3DC37DD7979EEAE0BB6B3
PRODUCT CODE : 059C5B2


RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Turbo Flasher\Nokia\Backup\357019041375410\357019041375410_112439.rpl

PA PUBLIC KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
5AA09885C97BF3B0F6783A6337506F9394F346EF
ImagePath: D:\flash files\RM-640\
ImageFilename: rm640__07.51.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : CCC
ASIC Index : CMT 0
Certificate 3
Name : HWC
ASIC Index : CMT 0
Certificate 4
Name : R&D
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
Partition Blocks : 1
1 PARTITION_INFO_BB5
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Partition Version : 00010000
Spare : FFFFFFFF
Num Partitions : 00000004
Partition 1
ID : 00000003 COPIEDOS
Attribute : 00000002 RO
Start Address : 000A0000
Size : 02C20000
Partition 2
ID : 00000008 FILESYSTEM
Attribute : 00000001 RW
Start Address : 03340000
Size : 04200000
Partition 3
ID : 0000000A PMM
Attribute : 00000001 RW
Start Address : 07540000
Size : 00600000
Partition 4
ID : 0000000B
Attribute : 00000001 RW
Start Address : 07B40000
Size : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF000000040000000300000002000A000002C20000000000080000000103340000042000000000000A0000000107540000006000000000000B0000000107B4000000180000A0
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0xE9 (233)
ERASE Blocks : 0x04 (4)
0 ERASE_AREA_BB5 0x12
Block Length : 0x53 (83)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 00020000-000203FF
1 : 00060000-0009FFFF
2 : 000A0000-0041FFFF
3 : 00420000-0069FFFF
4 : 006A0000-006DFFFF
5 : 006E0000-0123FFFF
6 : 02060000-020BFFFF
7 : 02CC0000-0333FFFF
8 : 07540000-07B3FFFF
9 : 01240000-0205FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
2 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
3 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000

ERASE_REQUEST_BB5 : 500A120B00030000020000000203FF120B000300000600000009FFFF120B000300000A00000041FFFF120B000300004200000069FFFF120B000300006A0000006DFFFF120B000300006E00000123FFFF120B00030002060000020BFFFF120B00030002CC00000333FFFF120B0003000754000007B3FFFF120B000300012400000205FFFFF9

FORMAT_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E

FORMAT_REQUEST_BB5 : 5001192F00030000000002000000000000000A00000001000000020000006400000002000000020000000100000000000000003B

FORMAT_REQUEST_BB5 : 5001192F00030000000002000000000000000B00000000000000020000006400000002000000020000000100000000000000003B

Successfully Erased...
Total blocks to write : 303
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS [5AA09885C97BF3B0F6783A6337506F9394F346EF]
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : UPDAPP
>> CMT Rootkey Hash CERT : LDSP
>> CMT Rootkey Hash CERT : DSP0
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : MCUSW1
>> CMT Rootkey Hash CERT : GENIO_INIT
>> CMT Rootkey Hash CERT : ISA+DYNSW
ImagePath: D:\flash files\RM-640\
ImageFilename: rm640__07.51.ppm_mr2
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 020C0000-02CBFFFF

ERASE_REQUEST_BB5 : 5001120B000300020C000002CBFFFF05

Successfully Erased...
Total blocks to write : 70
ImagePath: D:\flash files\RM-640\
ImageFilename: rm640__07.51.image_mr2_059D6N7_008
StartErase_DCT5...
BlockLength : 0x3F (63)
ERASE Blocks : 0x02 (2)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 03340000-0753FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000

ERASE_REQUEST_BB5 : 5001120B000300033400000753FFFF4F

FORMAT_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E

Successfully Erased...
Total blocks to write : 296
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
STATUS_REQUEST_BB5...
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000000
Additional Bad : 00000000
Correctable ECC : 00000000
FlashInfo.RestartMode : 2

Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:11
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)


SW: V 07.51 12-07-12 RM-640 (c) Nokia
IMEI: 357019041375410
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked

SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SUPER_DONGLE_TEST : PASSED
SECURITY_CODE : 12345

================================================
SL3 Phone detected
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
Done

Motorola MB855 Unlock Done!


Procedure:


1.Turn the phone on and wait for it to fully start up
2.Connect the phone to PC with USB cable
3.Ensure that the phone is not connected in USB mass storage mode
4.Install Motorola drivers (only if the phone is connected for the first time)
5.Select "Qualcomm" platform from the tab menu in the upper left side of the software
6.Go to "Unlock" tab
7.Press “Connect Motorola Android phone”
8.Select "Motorola USB Diagnostic Port" in the ports selection tab
9.Press "Unlock" button
10.Message "Unlocking phone… Done" indicates that procedure was completed successfully
11.Disconnect the handset
12.Phone is unlocked


HTC ONE X (at&t lock) Successfully Unlock with Credits


Status before:


Action Taken:

1.) Try ko sa activative na LGTool but no luck, dahil kailangan ng credits

2.) Buy credits or unlock code....Problem solve unlock done



Samsung t959 unlock by nck done


1st click samsung tab
2nd choose the model
3rd click read info
4th click unlock

no need rooting...



007HW SOFTBANK Unlock Done!


Flash phone first with HUAWEI U8850 Firmware.
Wait untill matapos ang flashing then unlock!

Firmware Link: Firmware and Flasher

Unlocking:


Install required drivers for Huawei U8850 (only if the phone is connected for the first time)
Select "Qualcomm" platform from the tab menu in the upper left side of the software
Go to "Unlock" tab
Connect the phone to PC with USB cable either in Normal or in Download mode connection:
Normal mode: turn the phone ON and wait until it fully powers on
Download mode (for SoftBank 007HW model): Press Vol + and Power ON simultaneously until you see a message that you are now in a Download mode
Select Huawei Diagnostic Port in the ports selection tab
Press "Unlock" button
Message "Unlocking phone… Done" indicates that procedure was completed successfully
Disconnect the handset
Phone is unlocked




Samsung S5253 Hang sa Logo Done.


problem hang in logo
flash ko sa ganitong flashfile "S5253DDJI7" result no luck at pagsindi ko ng phone fota installation nakalagay sa display ng phone, kaya download ulit sa support ng z3x , ito denownload ko "S5253DXKJ1_S5253OLBJJ2" at flash ulit, ayon sapul..

tools:
z3x samsung
$ micro-uart cable

action taken:
1. open shell
2. select s5250(wala sa list ang s5253)
3. load firmware
4.put phone in download mode(hold volume minus+camera+power on)
5. connect usb and wait flashing done..






ito na siya, done napo.




logs
Selected model: S5250
Selected com port: COM16
Selected speed port: 921600
Search flash modem ...
Search flash modem ...
Search flash modem ...
Search flash modem ...
Search flash modem ...
Search flash modem ... OK
Search flash modem on:COM16
Send APPS... OK
Send RC1... OK
Send RC2... OK
Send FFS... OK
Send CSC... OK
Send APP... OK
Elapsed time: 600 second, sw ver: 3.5.0038

netphone 701 unlock problem done


1. transfer all files to root of your SDCARD
2. install z4root and root your device (temporary or permanent)
3. install recovery manager
4. run recovery manager then click install recovery then select recovery clockwork 4.0.1.5 blade gen2.img
5. reboot and enter recovery mode (pressing volume down on green android)
6. backup you rom from recovery (backup and restore > backup)
7. wipe data/factory reset
8. install zip from sdcard (choose update-cm-7.0.3-Blade-signed.zip)
9. install google apps (choose gapps-gb-20110613-signed.zip)
10. reboot

after po ng reboot yung last procedure pagdating po sa cyanogen mod 7 na may andriod logo ay paulit ulit lang po siya at hindi natuloy sa main menu ang pagkakamali ko po ay di ko ginawa yung procedure 7 na wipe data kaya po sinubukan kung i hard reset siya by pressing home,volume up and power then choose wipe data yun po pag reboot niya tumuloy na sa main menu wag po natin kalimutan yung procedure no.7 para po walng problema.

Samsung i9100, s5830, s5360 hang on LOGO done


s5830, i9100, at s5360 puro hang sa logo

LAHAT ayaw makuha sa FACTORY RESET kaya go to flashing na lahat

una salang ko muna galaxy Y sa z3x

put in download mode hold volume down+power+home then load good flash file

success flashing s5360








habang naka salang ang galaxy y salang ko narin pinag sabay ko na i9100 sa ODIN

download mode ulet hold volume down+power+home then load good flash file





success flashing i9100





eto last salang ko pag katapos ng s5360 at di parin ako binigo

s5830 ace Put in download mode hold volume up + volume down + power then put tested flash file

s5830 flashing done



loudfone 350e open pattern power/switch on


Cloudfone open pattern


samsung t105g unlock


samsung t105g unlock galing ibang bansa
sino po na ka pag unlock ganito unit
wala po kasi suport files sa shell.
try ko sa *2767*3855# simlock code
try #*7337* simlock pa din.
any idea po mga ka bread.imei nya 356622041913360





Friday, May 24, 2013

SAMSUNG WAVE 3 - S8600 Bluescreen crash Done


SAMSUNG WAVE 3 - S8600 Bluescreen crash Done

Share ko lang po for reference

Ganito sya yung una ko matanggap





Download latest flash file: http://www.tsar3000.com/Joomla/index...sung&Itemid=82

Latest Multiloader: http://tizenhub.com/2011/10/multiloa...e-flasher.html

then Proceed

press volume down & power para mag download mode





* Open multiloader
* Search port
* Put Flash file
* Hit Download
* Wait until Finish




Result













Done

E586E Huawei Mobile Wifi Unlock Done


Connect E586E Huawei Mobile Wifi to pc via usb cable W/out sim

power it on and install drivers automatically

open dc unlocker, you must have credits for it will consume 2 credits from your account

click autosearch, once detected by dc unlcoker click unlock

done. you can now use any mibile broadband simcard....











DC - Unlocker 2 Client 1.00.1018

Detecting modem :

selection :
manufacturer - Huawei modems
model - Huawei E586

Found modem : E586Es-2
Model : Huawei E586
IMEI :
Serial NR. : Y3T4CB9262800968
Firmware : 21.322.06.01.105
Compile date / time : May 7 2012 10:30:16
Hardware ver. : CH1E586E
Dashboard version : UTPS1.09.00.105_MAC1.09.00.105
SIM Lock status : Locked (CardLock)
Wrong codes entered : 0 (unlock attempts left : 10)

================================================== =================

Check account status

User :
Password : OK !
Credits left : 50

================================================== =================

Unlocking, please wait ...

Modem successfully unlocked !

Credits left : 48


================================================== =================


DC - Unlocker 2 Client 1.00.1018

Detecting modem :

selection :
manufacturer - Huawei modems
model - Huawei E586

Found modem : E586Es-2
Model : Huawei E586
IMEI :
Serial NR. : Y3T4CB9262800968
Firmware : 21.322.06.01.105
Compile date / time : May 7 2012 10:30:16
Hardware ver. : CH1E586E
Dashboard version : UTPS1.09.00.105_MAC1.09.00.105
SIM Lock status : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

Motorola XT885 Unlocked done




Motorola XT885 Bell Canada Unlocked done






Procedures :

Submit your phone IMEI to Online Service (contact to sir Panjong for Codes)

Pagdating ng Codes galing sa nag Online Service sayo, Input nyo na po ang Code sa unit..


Paano ilagay ang Codes :

Kahit walang Original/Carrier Sim na nakalagay sa unit pwede gawin at mapalabas ang maghingi ng Codes





Punta sa Dial Call and Type #073887* tulad sa Picture sa taas..






At ito lalabas after ma input ang code

Then lagyan ng Local Sim natin at i-try


Pasensya na wala yung picture nung tapos na, excited kasi ang may ari na gamitin na nya

samsung i9100 automatic charge and cannot full charge done


samsung I9100
problem nang phone is automatic charge

action taken basa mode agad sa schematic diagram
change charging port with flex 3 times but same problem

download here schematic diagram

http://dfiles.eu/files/jcfkfjlu8




reheat or change u504 for automatic charge







done na ang unit yan lang poh ang ginagawa ko if automatic charge
REHEAT KO LANG UNG U504 NAWALA NA UNG AUTOMATIC CHARGE NYA

BUT THE PROBLEM IS

AFTER 1 DAY BUMALIK SI CUSTOMER AT OO NGA DAW NAWALA
ANG AUTOMATIC CHARGE ANG PROBLEM NAMAN NGAUN AT AYAW MA FULL CHARGE NANG
UNIT  SAGOT KO NAMAN SA CUSTOMER NGANGA HEHEHEHE JOKE LANG MGA SIR

SO SABI KO SIGEH MAAM ACCEPT KO ULIT ANG UNIT NYO
I'LL TRY TO OBSERVE KONG ANO TALAGA ANG PROBLEM...

SO GINAWA KO CHANGE KO UNG U504
BUT SAD TO SAY OBSERVE KO ANG UNIT HINDI NA FULL CHARGE ANG BATTERY

KAYA I DECIDE NA MAY IBANG PROBLEM PA ANG UNIT
AT ITO ANG SALARIN KAYA













DONE NA ANG UNIT

KAYA GINAWA KO PARA IWAS BACK JOB NA

PINALITAN KO NA DIN ANG

U504 FOR AUTOMATIC CHARGE

Q500 FOR BATTERY CANNOT FULL CHARGE

PINALITAN KO NA LANG UNG DALAWA

SEE MAY SPARE PARTS











DONE .......... FULL CHARGE NA ANG BATTERY

Lg p925 unlock done by octopus


LG P925 UNLOCK DONE BY OCTUPOS

history galing ibang bansa naka lock sa


AT&T

action taken via octopus box

5130 usb cabale

Connect
1. Install necessary drivers;
2. Power phone ON;
3. Select "Modem" connection mode;
4. Press "Connect" button;
5. Connect phone with P925 cable directly to motherboard USB port;
6. Type 3845#*925#;
7. Go to "Port Setting", select "CP Image download" and click "OK".

cleck unlock


wait antel done



Nokia c5-06 vibrate only done


brand: nokia

model: c5-06

history: unknown

problem: vibrate only

una ko ginawa as usual program muna but no luck.kaya decided ako i-hardware na.

* dismantle ang unit

malinis pa sariwa hmmm

* tapos mild reheat lang
see picture below




* then testing









* viola na

* assemble / finish product



Iphone 4 apple logo water damage after 10 secs. Dead done



ITO PO BEFORE ANG IPHONE 4 :









ITO NAMAN ANG PYESA NA TINANGGAL KO :










DI KO NA PO PINALITAN KC WALA NAMAN PO SIYA CONNECTION SA POWER TINAGGAL KO NALANG PO SIYA..


ITO NA PO FINISH PRODUCT :









Samsung Galaxy s3 mini GT-I8190 unlock done


Galaxy s3 mini GT-I8190 unlock done pahirapan sa pag detect pero succes din.

ito po ang picture











pera na mga boss.


procedure kong paano kon ginawa:


1. Step

- Download Samsung USB drivers
- Download ODIN 3.04 from
- Download recovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip recovery image
- Download SuperSu Last version

2. Step

- Turn off phone, then switch to download mode:
press together [volume down]+[home button]+[power button] (all at once),
press [volume up] for comfirm download mode.
- Connect usb cable, install drivers.

3. Step

- Run Odin 3.04, ticked 2 option F.reset times+auto reboot,
- Extract ecovery-clockwork-touch-6.0.2.7-golden.tar.md5.zip !Select PDA and browse to where you have extracted ecovery-clockwork-touch-6.0.2.7-golden.tar.md5
and select it

4. Step

- Odin should show device under 1 of ID:COM port.(if this not happends repeat from STEP 2)
- Press START.
- Phone should power on after flashing complete.


5. Step - ROOTING:

- Copy Downloaded SUperSU to externel sdcard (NOT INTERNAL ! )
- Power off your phone, after press [Vol up] + [Power] + [Home button] (all at once)
- Select Install zip from sdcard --->choose zip from sdcard ---> scroll to and open folder where located UPDATE-SuperSU-v1.05.zip-> choise UPDATE-SuperSU-v1.05.zip->
comfirm - YES - Install Update UPDATE-SuperSU-v1.05.zip.

6. gamit kayo sa cable na pang champ yong na modefied na kasi mag hanap ang z3x box bago ma conect.
Done ! And you are ready to go

Wednesday, May 22, 2013

Nokia Asha 205 no power done via free software











Action taken: Detach the unit and follow the guide picture, and make a modified USB cable





Procedure:Open Nokia Best
:Apply firmware
:Click Deade mode
:Click flash

Wait until the flashing is complete




[/


FInish Product