Samsung S3850 logo hang done via multiloader

Samsung S3850 logo hang done via multiloader
eto po sya at nagbiblink pa


tools:
micro usb
multiloader v5.65

procedure:
1.open multiloader
2.hold volume up+home+power on[eto po yung lalabas]

3.insert flash file
4.insert micro usb
5.automatic po sya magdetect ng com[ready]
6.then click download





ayan done na po hintayin na lang pong magreboot yung phone

Nokia 2320c-2b auto shut-off....done

share ko lang po itong nagawa ko mga boss.,
2320c-2b namamatay after 10 seconds,
eto po ang ginawa ko:
1. flash and write pm ko ng 2330c sa jaf....no luck
2. jumper ko yun 2 capasitor....done!

results:

iPad1 gsm recovery mode & no 3g signal (DONE)

iPad1 gsm

PROBLEM

Recovery Mode & no gsm Signal

TOOLS TO BE USED

1. USB cable
2. charging/usb connector
3. old iPad device (signal section pcb)


ACTION TAKEN

1. restore to iTunes (but error -1)
2. kick to tiny umbrella (but device always restarting)
3. change original charging/usb connector
4. reheat or change signal section from other device





eto po mga natry kong usb connector,pero lahat error -1 or auto reboot



kumuha po ako sa old device pra original ung gamitin ko





pinalitan ko po ng signal section,hnd ko natry reheat lang kc ng-aapura

E16 experia sony ericson unlock done via cyclone

experia E16 sony ericson unlock ni cyclone naka dale din
lock sa globe..

procedure.

open cyclone click experia unlok
put your password and user name
select model
select version of andriod

power off device
press and hold back keypad
insert micro usb cable (5310N)
insert batt.



now disconnect usb cable
power on phone
go to menu
setting
applications
developement
put check USB debugging

install nyo lang ito andriod driver.

done!!!





dapat may credits po ung cyclone nyo..

cherry mobile D10 keypad problem done

share ko lang d10 ayaw gumana ang cancel,up,down,right,left done....
jumper green line::

Motorola Charm MB502 hard reset

How to Hard Reset Motorola Charm MB502 to Factory Settings :

Factory Data Reset

From the screen of your phone, open the Applications Tray. (circle located in the middle at the right of the display screen) Or press the Menu button on the left from your screen.
Tap Settings.
Scroll down and tap Privacy.
Tap Factory Data Reset.
Tap Reset Phone.

Hard Reset using Buttons

Power off the phone, press and hold “X” key, then press power button.
Release “X” key when Triangle Droid screen is displayed.
Press Power button again to enter recovery mode and display menu choices.
Use Right/Left Nav-Key arrows to navigate through the on-screen menu
Navigate on-screen menu to select “wipe data/factory reset” and then press “Return” key
Navigate on-screen menu to select “reboot system now” and then press “Return” key
Wait for device to reboot

N7100s-2 lock sa O2 done sa hwk

tools:
hwk box
easy cable 3in1

procedure:
open DCTxBB5
select dct4
click check
tick info
tick init simlock

screen nuon lock pa sya?



logs

Quote:

IMEI: 354211-03-833931-8, ASIC: 11 SimLocks Initialized, Time: 00:36

logs info

Quote:

MCU SW : V 06.31 24-03-09 RM-438 (c) Nokia PPM SW : V 06.31 24-03-09 RM-438 (c) Nokia AE Product : Nokia 7100s-2 Prd.Code: 0584581 Bpr.Code: 0565328 Prod.Sn : DOV014703 HW Vers : 1001 UEM : 4386 UPP : 12648 [3168] RFIC Ver: 0500 DSP Vers: ICPR72_09w08_UPP LCD Type: SEIKO CAM Prim: GR0103D10126095A1F87_001002 IMEI : 354211-03-833931-8 SL Conf : 001-01-00000000000 SL Prof : 000000000003000-B SL Var : 00553542110383393100 SL Aux : 000B5555 HW Sig : 3EB0EC5AF7429FA1 Box Id : FFFFFFFFFFFFFFFF BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN Provider: GSM Test Equipment

for reference lng po.......

Nokia 6120c White Sreen Done

6120c White sreen din off Done

Procedure:
Open: mobileEx 3.5 (rev1.7)
Click HTI Flasher Interface Connect
Select Nokia Service Tool
Click BB5
Load E66_blank_504KB_pmm_10.fpsx sa MCU
Click Flash Wait Until DOne

Heres The LOgs:

Code:

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0855722
Using device: HTI, FW ver: 00.50, SN: 00009C4F
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 20B0000EA79E00522FFBB71724A9578565E941D8
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.34.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0030  - 0000 0321 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 11.34.0 revision: 2.0 size: 0x8FE30
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 0FE1BA92D924A658E4800780FA6F4868100AC947
Processing MCU file: E66_blank_504KB_pmm_10.fpsx 
 [BB5,XSR 1.5]  size: 504.33 KB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103
Erase skipped.
Flash programming ...
Prog.status for Asic CMT ...
 NAND: OK
Programming completed in 1.719 s
Total time for flashing process(boot+erase+write) was 11.078 s
 
Phone type: RM-243 (Nokia 6120)
SW version: V 07.10 15-07-09 RM-243 (c) Nokia 
Imei plain: 35431504128003-7
Product code: 0547931
Battery voltage: 4828 mV, current: 131 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
SECURITY_TEST passed
 
 
Imei net: 354315041280037
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.828 s

Finish Product:

w720 anycall unlock done.

1. read nvm first
2.direct unlock
3. smile at kunin si money

N73 main camera problem......done

Problem:camera ayaw gumana/no reaction.

history ng dinala sa akin wala po talaga reaction ang camera nya,binuksan ko po sa loob at nakita ko po na galing na sa iba ang unit,may repair na po sa bandang sim.

action taken:seacrh sa tahanan,pero no luck po lahat ng solution na nakita ko,magkaiba yata ang problema....kaya trace ko po yung line ng pin point nya at may putol nga...

ito po:






after ko naman pong maapply ang jumper na yan,ito na po ang resulta......


charannnnn.......

ZTE f160 direct unlocked by FG

ZTE f160 locked sa AT&T,direct unlocked by FG...:

-open shell
-select model...f165 (basta lang bumukas ung pack 5)
-Run (Amdo.exe)
-connect phone
-install drivers
-scan ports
-select "unlock"
-tick "do job"
-done...

screenshot of unlocking



unit


finish product