Galaxy-S I897 at&t Unlock done!!

GAlaxy-S I897 Unlock Done

Z3xbox
use Micro usb Cable

1. Power on phone.
2. on menu go to>application settings>development>select Enable debugging on
3. Connect cables and set the drivers.
4.on comport select Samsung Android USB modem..
5. Press Unlock SP button.
6.insert unaccepted sim and dial NET lock code...done!

 

All Done.....

IPHONE4 UNLOCKED via GEVEY SIM from NONOYXP

iphone4 unlocked!!!

gevey sim original from NONOYXP TESTED!!! FULL SIGNAL AND NO FLACTUATE!


1. Turn off your phone, insert your SIM card and GEVEY SIM together with the metal SIM tray provided into your iPhone 4G.

2. Turn on your iPhone and wait till the SIM Welcome menu appears then select "accept".

3. "No service" message will be displayed on the screen of your iPhone. Don't do anything, just wait until one signal bar appears in the upper left corner.

4. After you saw the signal bar dial "112" and hang up the phone within 2 seconds.

5. Turn on the Airplane mode on and turn it off right away. Your iPhone will display "SIM failure" and then "No SIM Card Installed"

6. Until the "No SIM Card Installed" message shows up, turn on the Airplane mode again and then turn it off. The signal will be received after the "SIM Failure" message is displayed again.

7. Your iPhone 4G has been unlocked.
























thanks to nonoyxp for full_support

more...... pila pila pa





for geveysim orders please contact nonoyxp or me pure original and tested

Credits goes to original uploader admin Marvin

X3-02 blinking revived by Phoenix USB flashing and Complete tutorial

Model unit/ X3-02

Problem/ Blinking

Action taken/ Program using Phoenix

Tools/ Phoenix crack,USB Cable

Procedure/ See The Picture



































 



Here's the Logs:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 520994 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 72848 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING:  Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing) 
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Reading Dynamic Camera Configuration ID 1
Updating configuration of camera with ID 1
Dynamic Camera Configuration updating failed: 0x84167501 - AudioVisual: No configuration file matching the camera name string 0A4E2007 was found.
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: DateTimeSettings, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ISSVariantActivator, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 3 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.

DONE..









Credits goes to original uploader

CYON SHOW LG_KU9300 unlock succSEXfully

Unlock failed contact support on the first few attempts.

After the sending of back up & dumps to z3x team & andrew_tm he made the patch unlock immediately to give support.Here's the screenshot & logs,

LG 2-3G Tool v.2.1.8
supported models: 386

Mode: Normal
Model: KU930003
Build version: Mar 22 201016:45:51Aug 14 200719:00:00KU930003
SW Version: M6280A-KLRZ-4.0.95T
IMEI: 35257104005647-9
BlueTooth Address: 6C6:8A:91:ED:EE
Phone Code: default
Flash Name: H8ACS0SJ0MCP
Flash Info: 05AC/0040/0800
Elapsed: 1 secs. --> (v.2.1.8)

Mode: Normal
Model: KU930003
Build version: Mar 22 201016:45:51Aug 14 200719:00:00KU930003
SW Version: M6280A-KLRZ-4.0.95T
IMEI: 35257104005647-9
BlueTooth Address: 6C6:8A:91:ED:EE
Phone Code: default
Flash Name: H8ACS0SJ0MCP
Flash Info: 05AC/0040/0800
Elapsed: 1 secs. --> (v.2.1.8)

Send preloader...
Send loader...
Loader startup Ok!
Init NAND Ok!
Ver: Mar 22 201016:45:51Aug 14 200719:00:00KU930003
page:00002780
Start erase block...
Erase done.
Write data...
Write done!
Unlock done.
Elapsed: 12 secs. --> (v.2.1.8)



SUCCESS!!!


Original Uploader Admin RYUKEN

iphone 3gs 4.3.2 cfw restore in itunes and unlock with preserved baseband 6.15

just to share this simple tricks on iphone 3gs ..

iphone 3gs 4.3.2 cfw restore in itunes and unlock with preserved baseband 6.15
without error in itunes..simple tricks details..

needed;
snowbreeze latest version to be download here
http://ih8sn0w.com/index.php/welcome.snow

original 4.3.2 firmware that should be downloaded in here
http://www.felixbruns.de/iPod/firmware/


and the host modify
mediafire.com gglic4blwawjzza

note;u will see this in your computer or just put this adress in adress bar in your windows
C:\WINDOWS\system32\drivers\etc

last tool of course your iphone usb cables

lets proceed
just click rectangle color in the screenshot to make it easy(spoonfeeding )

































before u restore the cook cfw firmware that u will see in your desktop u must delete the hosts in
C:\WINDOWS\system32\drivers\etc

i provide a back up hosts

after restore ur baseband is preserved in 6.15 but this must be done before anything else in redsnow in the firmware 4.1.2 or 4.1..


look at the image firmware is 4.3.2 but the baseband is 6.15..which is the baseband is preserve and capable in unlocking using cydia ..



Original Uploader Admin Livestrong