SONY ERICSSON J108i Unlock Done!

RUNNING v 1.1286/01.14/UNI
CARD SERIAL Ron_zel_83
PLEASE UPGRADE USBFLASH DRIVER 02.00.00.01
SIGNED MODE (USING SERVER)
CFG:100000000000

short credits consumption list :
S1 v1 xx credits ( OFFLINE )
S1 v2 xx credits ( OFFLINE )
S1 OPEN 03 credits ( OFFLINE FOR AID 004 PHONES)
A1 phones 03 credits
A2 phones 03 credits
S1 v2 alternative bypass unlock/repair 01 credits
W100,W150 codes 01 credits
S1 v2 alternative bypass standalone activation 20 credits

You CAN NOT unlock next phones without S1 servers:
u1/u5/u8 aid 004,
F305,J132,K330,R300,R306,S302,S312,T250,T280,T303, W205,W302,
W395,Z250,Z320 phones with damaged security zone,
F305,J132,K330,R300,R306,S302,S312,T250,T280,T303, W205,W302,
W395,Z250,Z320 aid 004,
w100,w150 full unlock,
ck13,ck15,lt26,wt13.

current updater version: 0.95
current setool2 version: 1.1286
SERVER CREDITS LEFT/USED: 10/20
CARD COUNTERS: FLASH 183, UNLOCK 47
Elapsed: 6 secs.
CFG:000000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081

OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 35887404141053 CERT: RED
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1038]
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED
EXECUTOR STARTED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM16
PHONE READY TO PROCEED.
GOT SEED: 007C79F0
ACTIVATION COMPLETED. USERCODE RESET TO "0000"
DO NOT DISCONNECT PHONE FROM CABLE
UNTIL PHONE TURNS ON BY ITSELF
Elapsed: 1162 secs.

5800 spd chinaphone PASSWORD done kay volcano

model: 5800 chinaphone spredtrum type
status: lock password
tools: volcano box
procedure: connect box>select spd>click info-run>click read ime/pasword and wait till finish. hindi na kailangan on ung unit basta nakakabit na sa cable auto detect na po sya,

status before



procedure


finished

huawei U8500 too many patterns attemp,done

share ko lang po mga mates huawei u8500 too many pattern attemp,done sa hard reset




proceedure : press and hold volume up + call + power on

Sony Ericsson U5i SMS problem done sa Updater

model:SOny ericsson U5i vivaz

status: SMS problem

tools: 5130 usb cable Sony ericsson Updater

procedure:

try to reset go to phone management default setting enter lock code to reset








reset no lack

try sa Updater

iphone 4s 5.0.1 softbank japan unlock again by xpsim

iphone4s 5.0.1 softbank japan unlock again xpsim




Pocedure:










Screen shot:

Updated SAM 0.1.16-1 Unlock tutorial easier than ever

Updated SAM 0.1.16-1 Unlock tutorial easier than ever

@sbingner has updated the SAM package to make the SAM unlock method even easier. We have had several reports of successful unlocks on our previous SAM unlock tutorial, but we also had an equal amount of people who could just not get it to work. Hopefully the updated version of SAM will help you finally get your device unlocked!
The best part about the updated SAM package is that you no longer need iTunes and most importantly, you don't need to worry about your country/carrier and SIM IDs anymore(which seemed to be the biggest issue for people using the initial tutorial).




Step 1: Install Sam Bingner's SAM package from Cydia. You can get it from Sam's repo which is http://repo.bingner.com make sure to use the newest version(0.1.16.-1 at the time this tutorial was created).
Step 2: Deactivate your phone(Using SAM) and insert your unofficial SIM card that you wish to unlock to.
Step 3: Open SAM and change method to "Auto Detect" and then go to the "Utilities" tab and choose the utility "Attempt Activation."
Step 4: That's all there is to it, your device should respring and your should have signal on your unofficial SIM. Pretty simple huh?



KNOWN ISSUES:
Just like the initial tutorial there are known issues with this new method. If you complete the steps above and you receive an error(specifically You must select the original carrier SIMID of your iPhone), attempt the following to fix the issue:
Step 1: Remove the SIM card from your phone.
Step 2: Download, install and open iFile and navigate to /var/root/Library. Tap edit in the upper right-hand corner and select the Lockdown folder. Tap the zip button to backup all the files in your lockdown folder and then delete the lockdown folder(make sure the backup is still in tact).
Step 3: In iFile again, navigate to /User/Library/Preferences and search for SAM and delete the com.bingner.sam.plist file.
Step 4: Power off your phone and then turn it back on.
Step 5: Insert your unofficial SIM card.
Step 6: Open SAMprefs go to Utilities and tap Attempt Activation. You will receive a dialogue stating that it may take a while. After your phone resprings, you should have signal on your unofficial carrier.


orig link: http://iphoneblogr.com/2012/04/updat...ier-than-ever/

lg cu920 unlock sa remote control ng setools.

unlock 2pcs lg cu920..

procedure

open lgtool
remote control
add request
piliin kung anu unit
lagay ng IMEI
tapus send request
get code
at itype sa unit ang nakuha code

done.........

Samsung t759 unlock DONE

1: Power on your phone.
2: Go to Menu > Settings > Applications > Development (on phone)
3: Switch on the option USB DEBUGGING and Allow mock locations
4: Connect your phone to the computer. (install drivers)




unlock DONE
ito n po cya

C2-00 No lights Lcd and keypad DONE!

C2-00 No lights Lcd and keypad DONE!



History:



Nabagsak daw!



Action taken:



trace ko lines ok naman



try ko jumper by this line







Tested and working 100%

SO-01b Xperia Unlock Done.

Want to share as reference lang po..

naka lock sa DoCoMo ...

Procedure:

1st sa setting check 1 , 2 , & 5 ...




next go to PDA select X10_Xperia and Click Unlock/Repair

and install driver..







Logs..

Quote:

PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ... RUNNING S1_EROM VER "R8A013" EROM_AID : 0001 LOADER_AID : 0001 SW_AID : 0001 CUST_AID : 0001 SIM_LOCK_AID : 0001 FLASH ID: "002C/00B3" LOADER VERSION: "R4A024" PHONE IMEI : 35949603012496 Checking for signature ... Waiting for calculation process ... RESPONSE: "SUCCESS" [1187] REMOVE SIM CARD FROM PHONE FULLY POWER ON PHONE ENABLE "USB DEBUGGING" IN PHONE: MENU,SETTINGS,APPLICATIONS,DEVELOPMENT INSTALL ADB DRIVERS IF NEEDED MAKE SURE PHONE HAS ANDROID 2.x FIRMWARE WARMING UP ... GETTING ROOT ACCESS ... APPLYING ROOT RIGHTS ... PROCESSING ... FINALIZING ... Unlock DONE Elapsed: 397 secs.