Security Repairer V0.0.5.0 - more can checks..

Security Repairer V0.0.5.0 - more canchecks..

Latest Update :
- Fiat 2250 MP3 TE SB05, BP7301, 7 646 301 316, 95320
- Fiat D225 MP3 TE SB05, BP8290, 7 648 290 316, 25320
- Fiat 199 CD MP3 MY (lack.), BP7386, 7 647 386 316, 95320
- ************** Audio 7 PDE, BE7078, 24c08 by Becker (Prod)

As always - run sec.exe or download installer from:
http://martech.pl/support/setup_rcdx.exe

Best Regards
Martech Team
MARTECH

Samsung C3222 dual sim unlocked by HWK

tools needed:
-hwk box

-c3303k micro uart cable

procedure:
-open "Sams"
-tick "connect"
-tick "OM/Swift"
-select phone model (C3222)
-tick "Mobile Info"
-tick "Unlock"
-done in 5 seconds...

Samsung Infuse 4g i997

Procedure:

- activated NS Pro Box
- cable used: usb micro(N5310)
- power ON the phone
- turn off bluetooth
- go to setting --> application--> development
- check usb debugging
- connect the phone to PC
- wait until finish


That's All! Unlock Done!

S3850 CorbyII Unlock

UNIT MODEL: Corby II S3850
PROVIDER: SUN (need to unlock)

TOOLS: Z3X Box For Samsung
USB cable(5310)

USB Driver: Download and install KIES software Open KIES software
go to tools tab under tools install driver

KIES Software Driver= http://www.samsung.com/uk/support/mo...OFTWARE.MANUAL
USB Driver= http://www.mediafire.com/?lp1pnd0s5g1h5kj

NOTE: Connect usb and power on the Phone (normal mode )

PROCEDURE:
Open Samsung 2G_tools_3.5.0018
Click Read Info (wait for the Codes)
Enter the NET LOCK to the Phone.. DONE!!!

 

 

 Unlock Done!!

Nokia n97-4 vibrating only

Problem: n97-4 vibrating only 

Tools: PC

           Hwk Box

           Usb Cable

           Ufc Cable

Procedure: Flash only with High Version Download Here

1ST BOOT : C0,07 [Rm-555] [2.2.0.0]
CMT ASICID: 000000010000022600010006400C192101031103
EM 1 ID : 00000296
EM 2 ID : 00000B22
CMT PUBID : 0980010117830052A7D8FB122507D0D497009881
CMT MODE : 00
CMT HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROMID : 4B9B75103E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
CMT KSIG0 : C49131EB98702B6A39D7F285B1FF2D9BE1D6F863
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : RM-555_12.0.110_prd.core.C00
CMT NAND Erase Area: 0x00040000-00082FFF
CMT NAND Erase Area: 0x00083400-003FFFFF
CMT NAND Erase Area: 0x00800000-00D5FFFF
CMT NAND Erase Area: 0x00D60000-0D39FFFF
CMT FLASH ERASE OK, Time: 00:01
Written: 11 Certificate(s)
CMT FLASH WRITE OK, Time: 09:41
IMAGE : rm555ENOA09w24v0.050.fpsx
CMT NAND Erase Area: 0x00400000-007FFFFF
ENO FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
ENO FLASH WRITE OK, Time: 00:14
IMAGE : RM555_12.0.110_uda_1_001.uda.fpsx
CMT NAND Erase Area: 0x0D3A0000-0FFFFFFF
CNT FLASH ERASE OK, Time: 00:00
CNT FLASH WRITE OK, Time: 02:15
IMAGE : RM-555_12.0.110_prd.rofs2.V03
CMT NAND Erase Area: 0x094A0000-0C49FFFF
PPM FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
PPM FLASH WRITE OK, Time: 02:18
IMAGE : RM-555_12.0.110_C01_prd.rofs3.fpsx
CMT NAND Erase Area: 0x0C4A0000-0D39FFFF
CUS FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
CUS FLASH WRITE OK, Time: 00:00
Flashing Completed, Rebooting Mobile

All Done!

Motorola V3xx Unlocked Done by smart TP

V3xx Lock  AT&T

Tools:

smartclip box
s-card
smartTP V2




Procedure:

Perform "Prepare smart testpoint"
when smartmoto prompts to disable the handset please perform the
following:

- Disconnect the handset and Dismantle it
- Please ensure that the LCD is disconnected from the board
- Connect smart testpoint cable to the port rj45 on smartclip
- Connect data cable to phone
- Connect battery hook to the positive (+) battery contact on PCB
- Connect needle A to the primary Testpoint A and hold it untill the
software inform that it can be disconnected
- wait till unlocked Ok
- Done

Logs:

Quote:

SmartMoto 4.08 S-Card: 337570531 Smart-Clip dongle, v 3.05, assigned Smart-Clip: 203456052 Europe, initializing... OK Smart Adaptor: serial 3946370494, firmware version 1.05 Clip serial: 203456052, version: 5.02, initializing... OK Searching for phone... no phone found Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 io timeout Searching for phone... no phone found Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1103061064C5B6D8.bk_ Processing data, 6 of 6 block...OK Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Argon Switching to flash mode... OK Reading phone boot version... 0.00 Reading flash id... AMD - S29WS512P Phone group: K3,M702iG,M702iS,V1100,V3xx,V6,V9 Hardware IMEI: 3 IMEI OTP status: locked Security area saved to "PDS for S Flash Argon 35.mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1103061064C5B6D8.bk_ Restore OK Unlocking phone... OK Turning phone off... OK

 

LG KU9100 show successfully unlock by VYGIS

Unit. lg ku9100 show
Box, vygis & GPG combo cable..