Motorola V3xx Unlocked Done by smart TP

V3xx Lock  AT&T

Tools:

smartclip box
s-card
smartTP V2




Procedure:

Perform "Prepare smart testpoint"
when smartmoto prompts to disable the handset please perform the
following:

- Disconnect the handset and Dismantle it
- Please ensure that the LCD is disconnected from the board
- Connect smart testpoint cable to the port rj45 on smartclip
- Connect data cable to phone
- Connect battery hook to the positive (+) battery contact on PCB
- Connect needle A to the primary Testpoint A and hold it untill the
software inform that it can be disconnected
- wait till unlocked Ok
- Done

Logs:

Quote:

SmartMoto 4.08 S-Card: 337570531 Smart-Clip dongle, v 3.05, assigned Smart-Clip: 203456052 Europe, initializing... OK Smart Adaptor: serial 3946370494, firmware version 1.05 Clip serial: 203456052, version: 5.02, initializing... OK Searching for phone... no phone found Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 io timeout Searching for phone... no phone found Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Model RAZRV3xx Firmware R26111MLD-AS_U_96.B0.0AR Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1103061064C5B6D8.bk_ Processing data, 6 of 6 block...OK Searching for phone... found Motorola Phone (RAZRV3xx), getting test interface... OK Switching to flash mode... OK [S Flash Argon] Reading phone boot version... 3.08 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Argon Switching to flash mode... OK Reading phone boot version... 0.00 Reading flash id... AMD - S29WS512P Phone group: K3,M702iG,M702iS,V1100,V3xx,V6,V9 Hardware IMEI: 3 IMEI OTP status: locked Security area saved to "PDS for S Flash Argon 35.mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1103061064C5B6D8.bk_ Restore OK Unlocking phone... OK Turning phone off... OK