Samsung i937 (fucos s) unlock ok!

need to unlock!!

use micro usb,and octopus software..

To connect SGH-I937 phone you have to perform the following steps:
1. Disconnect cable from phone.
2. Go to dial window.

3. Enter "##634#" number.
4. Input *#7284# code.
5. Select "Modem, USB Diag" option.
6. Press "OK" button.
7. Wait until phone restart.
8. Press "Read Info" in Octopus Samsung software.



pag info tick unlock....



testing........



ok na malabo lang

Anycall SPH-W3300 Unlocked Done

Tools and Procedure

V804 Usb Cable
Vygis Box
Install Driver

then click Direct Unlock

Nokia 6212c unlock done via dits and jtag clips

ito mga boss bka my maitulong ako kc wlang availble n cable ito kya naisip ko
mag modify na lng combining dits ang jtag clips.....




ito na detected na at unlock via cyclone....


heto na ang unit...

Nokia 6212c unlock done via dits and jtag clips

ito mga boss bka my maitulong ako kc wlang availble n cable ito kya naisip ko
mag modify na lng combining dits ang jtag clips.....




ito na detected na at unlock via cyclone....


heto na ang unit...

Samsung I727R Galaxy SII LTE rogers unlock done

 sim lock to rogers...need to unlock..


tools
z3x
use micro quart usb cable
before you proceed set muna natin ang phone,para ma recognize ang phone.

just follow the following procedure.









Enter "*#7284#" number.
Set "USB" button to "Modem" value.
Close window.
Go to dial window.
Enter "*#9090#" number.
Set "Diag config" to "USB" value.
Restart phone.

pagkatapos ma set reebot the phone..
connect the phone to pc wait for the driver to be installed...
hit direct unlock...
note and tip;manually select the port........
done...

logs.

Samsung SGH-i677 windows mobile unlOckED

SGH-i677 windows mobile unlOckED [atnt prOvider]

need:
* micro USB cable






procedure:
Go to dial window.
Enter "##634#" number.
Input *#7284# code.
Select "Modem, USB Diag" option.
Press "OK" button.
Wait until phone restart.
tick unlock then press factory



Unlocking:

Please Wait Enter Test Mode ...
Enter Test Mode OK!
PDA SW Ver: i677UCKJ1
CSC Ver: i677ATTKJ1
Phone SW Ver: i677UCKJ1
IMEI: 359881040291783
Product ID: 7630A-AAEQMWZM-1.6.002402
Phone SN: R21C33BC55
Unlocking ...
UnLock OK !
All Jobs Done.
Total Time: 6.68 s

Quote:

if still ask for pin or code just enter 00000000

MY phone touch screen security code done by Avator

Procedure inside

MY phone touch screen security code done by Avator

Procedure inside

Galaxy s3 (i9300T) unlock.

Lock in vodaphone.

1. root via odin.

2. direct unlock.

Quote:

13:18:55 > KILLING ADB SERVER (IF RUNNING): OK! 13:19:35 > SEARCHING FOR PHONE: OK! 13:19:38 > READING INFO: OK! 13:19:45 > CHECKING ROOT: OK! 13:19:45 > BRAND: SAMSUNG 13:19:45 > MODEL: GT-I9300T / M0 13:19:45 > BOOT LOADER: I9300TDUALE6 13:19:45 > VERSION: 4.0.4 / IMM76D 13:19:45 > FIRMWARE: M0DU-USER / I9300TDULE6 13:19:45 > KERNEL: 3.0.15-CL554509-user (gcc 4.4.3) 13:19:45 > CPU TYPE: EXYNOS4 / ARMv7 13:19:45 > SAMSUNG GALAXY S3 READ INFO: END! 13:19:48 > VERSION MICRO-BOX A.I.O. V2.1.0.5 13:19:48 > SAMSUNG GALAXY S3 UNLOCK: START! 13:19:48 > KILLING ADB SERVER (IF RUNNING): OK! 13:19:48 > SEARCHING FOR PHONE: OK! 13:19:51 > READING INFO: OK! 13:19:51 > BRAND: SAMSUNG 13:19:51 > MODEL: GT-I9300T / M0 13:19:51 > BOOT LOADER: I9300TDUALE6 13:19:51 > VERSION: 4.0.4 / IMM76D 13:19:51 > FIRMWARE: M0DU-USER / I9300TDULE6 13:19:51 > KERNEL: 3.0.15-CL554509-user (gcc 4.4.3) 13:19:51 > CPU TYPE: EXYNOS4 / ARMv7 13:19:57 > CHECKING ROOT: OK! 13:20:11 > READING DATA: OK! 13:20:12 > Backups\SAMSUNG\Galaxy S3\I9300__SIMLOCK_2012_06_29_13_20_12.mbf 13:20:12 > SAVING BACKUP: OK! 13:20:12 > SEARCHING SIGNATURE: OK! 13:20:40 > WRITING DATA: OK! 13:20:40 > SAMSUNG GALAXY S3 UNLOCK: END!

God is good
All the time!

Sony Ericsson W150i auto restart

sony ericsson w150i auto restart.
tools needed.
setool activated.

n5130 micro usb cable..
identify muna para makita ang vertion..
o[pen setool select semc odm
choose model w150 yendo
load main and fs na nadownload sa support.
tick flash hold down and center button to detect the unit.
wait till done..
screen shot.

ayos

LG E739 unlock with remote service

Put IMEI in the LGETool
Remote Services




LG myTouch E739 Unlock Instructions

1. Turn on phone without a SIM card
2. Get to the dial screen and press 2945#*739#
3. Select Network
4. Enter the 16 digit Network Unlock Code
5. Phone is now unlocked!

Samsung D780 restarting done by hwk.

restarting d780

tools: hwk
jumper wire

c3303k reset lock code done

tools:z3x box
usb cable ng nokia 5310

procedure:click direct unlock

Press "volume up" + "lock" and connect USB cable to phone

Code:

lected model: C3303
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Aborted by user
Elapsed time: 25 second, sw ver: 3.5.0027
-------------------------------------------------------------------------------
Selected model: C3303
Selected com port: COM32
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Aborted by user
Elapsed time: 5 second, sw ver: 3.5.0027
-------------------------------------------------------------------------------
Selected model: C3303
Selected com port: COM32
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe...
Aborted by user
Elapsed time: 34 second, sw ver: 3.5.0027
-------------------------------------------------------------------------------
Selected model: C3303
Selected com port: COM32
Selected speed port: 921600
Press "volume up" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A33
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Unlock block
Unlock block
Erasing... OK
Sending... OK
Unlock - ok
If lock - not deactivate: Please make full reset *2767*3855# + input code #7465625*638*00000000#
Elapsed time: 117 second, sw ver: 3.5.0027
-------------------------------------------------------------------------------

wait until done

S8300 restart DONE

problem: restart
action : flash via multiloader 5.67

files needed : 1.s8300 firmware
2.flasher

procedure :

1. Run Samsung S8300 UltraTouch Downloader and select MSM6280.
2. In case you need to flash Boot files then check this option: Full Download.
3. Click Boot button and select the boot files folder.

4. Click on Amss button and select: amss_compressed_base.bin
5. Click on Rsrc1 button and select: Rsrc_S8300_Open_Europe_Common.rc1
6. Click on Rsrc2 button and select: Rsrc2_S8300(Low).rc2
7. Click on Factory FS button and select: FactoryFs_S8300_Open_Europe_Common.ffs
8. Put your phone into Download Mode ( press 9 key + Power ).
9. Connect USB cable to your phone and click on Port Search button to check good connection.
10. Click on Download button to start the process.
11. Do not touch or remove cable from the phone till all is done.

PICS

BEFORE


AFTER FLASHING AND FINISH PRODUCT

N73 Keypad Malfunction

just want to share for reference...

N73 Keypad Malfunction....

when i dial 2,3,8 got a multiple output...




action taken...

clean keypad-no luck

change keypad-no luck

change crystal ic for keypad no luck...

remove resistor component of shutter-solution done...


finish product...

Motorola android mb501 unlock free!

HISTORY:0 left n nung dinala skin itong dalawa kya cguro tinanggihan n rin s iba hindi
n pwede pasukan ng code..kaya search button n ako my nkita ako d2 kya lng parang
my kung s procedure eh kya ito ibahagi ko nmn s inyo mga boss.

MGA SANGKAP:
RSD
FIRMWARE
UNLOCK.BAT

UNLOCK.KO
RECOVERY.IMG
ENTER SU
SROCKYOU

PROCEDURE:
* pag nadownload n lahat extract nyo lng lahat s drive C ang srockyou,enter us
unlock.ko at recovery.img then extract unlock.bat in desktop.
gaya nito:
* next flash the phone using rsd .(USB DEBUG and UNKNOWN SOURCES must be chck)
gaya nito:

ayan flashing finish ready to unlock..

UNLOCKING:
* create ur MOTOBLUR account on mobile via wifi
after create ur account go to menu/market apps/search CONNECTBOT
and install the application.
*connect ur mobile into ur pc(make sure u are in usb debug mode)
*open unlock file on ur desktop(do not close)
*open connectbot apps on ur mobile select local type srockyou then enter
*At this point when you get the $ sign on the phone (DON'T CLOSE THE UNLOCK.BAT ON YOUR PC DESKTOP,
and you will also see the $ in the unlock.bat opened)
then type this command on the phone after logging in to srockyou ,

cd data/local/tmp
./rageagainstthecage-arm5.bin

- an installation will run on your phone wait till its done and exit the srockyou server.
- now log in again to srockyou and this time you will have # sign , then you type in this command

insmod sdcard/unlock.ko

and press enter on the phone and when the # prompt comes back then it means you are successful.
Now you can exit srockyou server.

Now press phone handle on the phone like you want to make call and then enter this number

#073887* , this will take you to enter simunlock code, here you can type any 8 numbers.

all done!!!