problem: restart
action : flash via multiloader 5.67
files needed : 1.s8300 firmware
2.flasher
procedure :
1. Run Samsung S8300 UltraTouch Downloader and select MSM6280.
2. In case you need to flash Boot files then check this option: Full Download.
3. Click Boot button and select the boot files folder.
4. Click on Amss button and select: amss_compressed_base.bin
5. Click on Rsrc1 button and select: Rsrc_S8300_Open_Europe_Common.rc1
6. Click on Rsrc2 button and select: Rsrc2_S8300(Low).rc2
7. Click on Factory FS button and select: FactoryFs_S8300_Open_Europe_Common.ffs
8. Put your phone into Download Mode ( press 9 key + Power ).
9. Connect USB cable to your phone and click on Port Search button to check good connection.
10. Click on Download button to start the process.
11. Do not touch or remove cable from the phone till all is done.
action : flash via multiloader 5.67
files needed : 1.s8300 firmware
2.flasher
procedure :
1. Run Samsung S8300 UltraTouch Downloader and select MSM6280.
2. In case you need to flash Boot files then check this option: Full Download.
3. Click Boot button and select the boot files folder.
4. Click on Amss button and select: amss_compressed_base.bin
5. Click on Rsrc1 button and select: Rsrc_S8300_Open_Europe_Common.rc1
6. Click on Rsrc2 button and select: Rsrc2_S8300(Low).rc2
7. Click on Factory FS button and select: FactoryFs_S8300_Open_Europe_Common.ffs
8. Put your phone into Download Mode ( press 9 key + Power ).
9. Connect USB cable to your phone and click on Port Search button to check good connection.
10. Click on Download button to start the process.
11. Do not touch or remove cable from the phone till all is done.
No comments:
Post a Comment