Cherry Mobile Flare 2X Deadboot done ATF JTAG

Cherry Mobile Flare 2X Deadboot done ATF JTAG

Cherry Mobile Flare 2X Deadboot done ATF JTAG

1. Download CHERRY MOBILE FLARE 2X AFP FILE

2. Prepare JTAG PINOUTS



3. Open ATF JTAG Sofftware

4. Click SELECT PHONE tab, and browse/ select the file downloaded earlier.

5. Click RESET JTAG tab.

6. Click RESTORE BOOT tab and wait till finished.





LOGS:

Code:

Default language ID 0x0409
JTAG Interface Connected, S/N 0xXXXXXXXX
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 12/30/2013 9:05:00 AM
==========================================================
 Phone Type     : Cherry Mobile Flare 2X
 CPU Type       : Qualcomm MSM8225Q
 Storage TYpe   : eMMC 4GB
 Boot Package   : Full Factory Restore
 Android Version: 4.1.2 (Jelly Bean)
 Kernel Version : 3.4.0
 Build Number   : TBW593922_8760_V006094
==========================================================
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
8. Full Factory Restore takes 40 minutes to Finish
----------------------------------------------------------
 
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x008E00E1 IR4
Restore Boot...
Waiting for Device Connection 20 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting EMMC #1 ID...Hynix  XINYH, 3.61 GiB
Testing Device Memory...OK
Sending Flash Loader...OK
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Full Factory Restore Done!
  
Warning: IMEI1 and IMEI2 has been Changed!
============================================================================
 1. Remove JTAG Connection and Assemble Phone
 2. Enter Recovery: Press Volume Up + Power Buttons until LCD Becomes RED
 3. Select "wipe data/factory reset"
 4. Select "Yes -- delete all user data"
 5. Select "reboot system now"
 6. Wait for 3-5 minutes while Phone is Performing Initial Boot Sequence
 7. After Phone starts up, you may need to format Internal SD Card
  
 8. Restore Original IMEI1 and IMEI2 by following intructions here:
  
                  www.advance-box.com/tmp/cherry_imei.php
============================================================================
 
Completed in 0h 53m 14s. Code Download Speed 46026 KiB/sec.

NOTE: After ng flashing naretain naman un orig IMEI ng phone. If need irepair ung IMEI goto this LINK

FINISHED PRODUCT: