Nokia Asha 200 blinking and keypad light stanby done

Nokia Asha 200 blinking and keypad light stanby done

 

UNIT:NOKIA 200

PROMBLEM :BLINKING AND KEYPAD LIGHT STANDBY

HESTORY:NAG KA GANUN LANG

PROCEDURE :OPEN CYLONE

SELECT CONNECTION :SELECT USB

LOAD FIRMWARE

CLICK: FLASH SAPUL

ETO LOGS:

HTML Code:

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug  6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0007A4E
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
Initializing security card...
Card Serial Number: D00C031E
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.05v PASSED
MCU Voltage 3.29v PASSED
Core Voltage 1.79v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.08v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 5.04v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 1.546GB
Avaiable Virtual Memory: 1.913GB
Avaiable Pagefile: 3.170GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 3DA508C0_rm761__11.95.mcusw (XGold2)...
Checking 3DA508C0_rm761__11.95.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.46_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Processing "rm761__11.95.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41A7FFFF...
Flashing at 0x40280000...
Flashed 25165824 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 66FF791B_rm761__11.95.ppm_t (XGold2)...
Checking 66FF791B_rm761__11.95.ppm_t...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41A80000-0x421BFFFF...
Flashing at 0x41A80000...
Flashed 6612228 bytes OK
Processing A839882C_rm761__11.95.image_t_059J4P2 (XGold2)...
Checking A839882C_rm761__11.95.image_t_059J4P2...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t_059J4P2.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x421C0000-0x43E1FFFF...
Flashing at 0x421C0000...
Flashed 15859712 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 11.95
MCU Date 19-12-12
Product  RM-761 (Nokia RM-761)
Manufacturer (c) Nokia            
IMEI  352415054820083
Mastercode 2270204241
IMEI Spare 3A25140545280008
IMEI SV  3325140545280018F2000000
PPM  V 11.95, 19-12-12, RM-761, (c) Nokia            , T
CNT  Content: t_059J4P2, V 11.95, 19-12-12, RM-761, (c) Nokia            
PSN  8CB0159AH
Product Code 059J4P2
Module Code 0204895
Basic Product Code 059F7N6
PSD  0000000000000000
LPSN  0
HW  1000
RFIC  Dummy RFIC version
LCD  AUO
BT  19e2-47026
Asic  11
HW Signature 12175749F4C3F28E
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000003000B
Simlock Aux 000B0000
Simlock IMEI 00003524150548200800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-761_352415054820083_11102013_90949 AM.SecurityBlock.PM"
WARNING: Failed to read RAP Public ID
Reading CYC file from phone...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 3DA508C0_rm761__11.95.mcusw (XGold2)...
Checking 3DA508C0_rm761__11.95.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.46_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Processing "rm761__11.95.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41A7FFFF...
Flashing at 0x40280000...
Flashed 25165824 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 66FF791B_rm761__11.95.ppm_t (XGold2)...
Checking 66FF791B_rm761__11.95.ppm_t...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41A80000-0x421BFFFF...
Flashing at 0x41A80000...
Flashed 6612228 bytes OK
Processing A839882C_rm761__11.95.image_t_059J4P2 (XGold2)...
Checking A839882C_rm761__11.95.image_t_059J4P2...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t_059J4P2.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x421C0000-0x43E1FFFF...
Flashing at 0x421C0000...
Flashed 15859712 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 11.95
MCU Date 19-12-12
Product  RM-761 (Nokia RM-761)
Manufacturer (c) Nokia            
IMEI  352415054820083
Mastercode 2270204241
IMEI Spare 3A25140545280008
IMEI SV  3325140545280018F2000000
PPM  V 11.95, 19-12-12, RM-761, (c) Nokia            , T
CNT  Content: t_059J4P2, V 11.95, 19-12-12, RM-761, (c) Nokia            
PSN  8CB0159AH
Product Code 059J4P2
Module Code 0204895
Basic Product Code 059F7N6
PSD  0000000000000000
LPSN  0
HW  1000
RFIC  Dummy RFIC version
LCD  AUO
BT  19e2-47026
Asic  11
HW Signature 12175749F4C3F28E
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000003000B
Simlock Aux 000B0000
Simlock IMEI 00003524150548200800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

ETO FIRM WARE SAME PRODUCT CODE
http://www.mrcrab.net/Nokia-Product-...ctCode=059J4P2