Samsung Galaxy Note 3 N9005 LTE Play Store Hang Only Solution

Problem: Play Store Hang Only

Try to hard reset but no luck to fix

So i decided to Software / Flashing in Odin Software

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung SM-N9005 Galaxy Note 3 LTE Firmware:
- Samsung SM-N9005 Galaxy Note 3 LTE Stock Firmware Package.
- Odin Flasher Version 3.09.


Needed Tools For Updating Samsung SM-N9005 Galaxy Note 3 LTE Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung SM-N9005 Galaxy Note 3 LTE Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: HLTE_EUR_OPEN_32G.pit

- Firmware files selection:

Click BL button to select: BL_N9005xxxxxxx_1628120_REV03_user_low_ship_....tar.md5
Click AP button to select: AP_N9005xxxxxxx_1628120_REV03_user_low_ship_....tar.md5
Click CP button to select: CP_N9005xxxxxxx_REV03_CL1252918.tar.md5
Click CSC button to select: CSC_Oxx_N9005Oxxxxxx_1581544_REV03_user_low_ship_....tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notice: When you get one big file inside the firmware package, Then it should be selected as a AP file only, And do not check Re-Partition option or use PIT file at all.

 
I only used i file so that i'll put  to AP

That's it its done!