Cherry mobile Flare
A.K.A ( FLARE)
Sorry sa lahat ng Nag antay, maxado po kasi tayung busy mga bossing ito na po kau na po bahakla maraming salamt po .
Solution For Deadboot
Download first this Files bago tayu mag simula
QPST 2.7 build 399 -
http://www.mediafire.com/download/8f...ST-2.7.399.rar
JB drivers -
http://www.mediafire.com/?8dbfehhtb8ak328
Jelly Bean BP Firmware
http://www.mediafire.com/?1axjuk693fcrbza
WARNING : Supported ito sa mga flare na nadedetect pa ng Pc if hndi ito ma detect sa pc dont do this anymore
Install QPTS (alam ko pamilyar kayo jn.. ginagamit yan sa mga broadband stick..)
install lahat ng drivers para walang aberya
Install drivers
1. Connect deadboot flare to PC / Laptop.
2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.
3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device
4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.
5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
Run QPST and reprogram EMMC (dito tayu mag sisimula)
1. Run EMMC SOFTWARE DOWNLOAD.
2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.
3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.
4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex
5. Under BOOT IMAGE, enter 8X25_msimage.mbn
6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.
7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN
8. PRESS DOWNLOAD
9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.
10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.
11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked.
after Program makikita nyo nalng na may lalabas na "REPAIR ENtRY QPST " or what bsta once na lumabas na ang ENRT QPTS ENTRY " proceed na kau sa Pag install ng JELLY BEAN
A.K.A ( FLARE)
Sorry sa lahat ng Nag antay, maxado po kasi tayung busy mga bossing ito na po kau na po bahakla maraming salamt po .
Solution For Deadboot
Download first this Files bago tayu mag simula
QPST 2.7 build 399 -
http://www.mediafire.com/download/8f...ST-2.7.399.rar
JB drivers -
http://www.mediafire.com/?8dbfehhtb8ak328
Jelly Bean BP Firmware
http://www.mediafire.com/?1axjuk693fcrbza
WARNING : Supported ito sa mga flare na nadedetect pa ng Pc if hndi ito ma detect sa pc dont do this anymore
Install QPTS (alam ko pamilyar kayo jn.. ginagamit yan sa mga broadband stick..)
install lahat ng drivers para walang aberya
Install drivers
1. Connect deadboot flare to PC / Laptop.
2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.
3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device
4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.
5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
Run QPST and reprogram EMMC (dito tayu mag sisimula)
1. Run EMMC SOFTWARE DOWNLOAD.
2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.
3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.
4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex
5. Under BOOT IMAGE, enter 8X25_msimage.mbn
6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.
7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN
8. PRESS DOWNLOAD
9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.
10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.
11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked.
after Program makikita nyo nalng na may lalabas na "REPAIR ENtRY QPST " or what bsta once na lumabas na ang ENRT QPTS ENTRY " proceed na kau sa Pag install ng JELLY BEAN
No comments:
Post a Comment