ACTION TAKEN:
Program/Burn firmware
TOOLS:
1.Male usb 2.0 cable
2.Driver Package Metorit Android Nb7 PX8690/800MHZ FIRMWARE
3.OTG DRIVER
4.Burn Tool IUW
PROCEDURE
Burning by OTGClick
1 image for larger version. Name: image002.jpg Views: 34366 Size: 21.3 KB ID: 28111). Open the IUW burning tools and select Link USB
2). select Easy burn
3). Select the ius .iso file
4). Connect the the tablet to computer
5). Press Power+Menu to boot the 10 inch tablet and Power+Voice+ for 8 inch. When the small box in Tool turns green, press Burn.
6). After burning finishes, plug out the cable and press Reset, then restart the device.
File list:
• U0: u-boot-nand.bin
• KERNEL: uImage (or uimg.xxxx)
• SYSTEM: system.img
• USER: userdata.img
• RAMDISK: ramdisk.img
• RECVRD: recovery_rd.img (It can be ignored if there is no RECVRD)
ETO NAMAN ANG PINAGMULAN NG REFERENCE; http://www.androidtablets.net/forum/...ing-tools.html jan ko na din nakuha ung firmware.
REFERENCE:
Eto ung mga ginawa ko connect ko usb sa NB7 then to PC
then before power on eto ung boot mode nya para madetect xa ng pc..pagkalagay ng usb male to male connector press power while holding menu makikita umg menu key sa upper keyboard right side M.
eto na sumunod BURNING PROCESS NA KASI READY NA FIRMWARE KO PX8690
Dito naman ako kumuha ng driver para madetect ng pc ang netbook
kung wala kau nitong cdrom dun sa pearl site na sinabi ko merun din...punta ka lang ng device manger then update driver at pag detected na pwedi na mgstart ng burn sa NB7.
BURNING IMAGES
and pagtapos nya mgburn update ang ss:
after nya magupdate eto makikita mo sa android netbook "Please Pull out OTG cable and restart"
Then its done..eto magiging outcome nya.
No comments:
Post a Comment