Sunday, December 4, 2011
Saturday, December 3, 2011
Anycall Samsung W5300 Unlock by Octopus
Nokia 2630 No signal (Result Unknown) done!!!
Samsung e2222 unlock by z3x
Selected model: E2222
Selected com port: COM3
Selected speed port: 921600
Press "volume down" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A34
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Erasing... OK
Sending... OK
Unlock - ok
If lock - not deactivate: Please make full reset *2767*3855# + input code #7465625*638*00000000#
Elapsed time: 80 second, sw ver: 3.5.0029
Selected com port: COM3
Selected speed port: 921600
Press "volume down" + "lock" and connect USB cable to phone
Connect to control pipe... OK
Processor ID -> 0A34
Sending loader... OK
Connect to control pipe... OK
Connect to write pipe... OK
Connect to read pipe... OK
Damping... OK
Erasing... OK
Sending... OK
Unlock - ok
If lock - not deactivate: Please make full reset *2767*3855# + input code #7465625*638*00000000#
Elapsed time: 80 second, sw ver: 3.5.0029
Blackberry 9300 Red Light / Water Damage Done!
status: red blink only..
water damage
procedure: set program by bbsak: no luck not detect
kaya punta ako drive c then set by aploader pero error,,stop and try again so try ko uli pero ganun pa din..
so open ko unit nakita ko corroded mga parts near battery connector kaya reheat at clean ko then assemble uli ayun gumana pero nag appear error 507
kaya set uli program using bbsak pero not detect so punta uli ako drive c then aploader kaya pala may password then syempre after remove password set uli ang software at heto ok na ...
water damage
procedure: set program by bbsak: no luck not detect
kaya punta ako drive c then set by aploader pero error,,stop and try again so try ko uli pero ganun pa din..
so open ko unit nakita ko corroded mga parts near battery connector kaya reheat at clean ko then assemble uli ayun gumana pero nag appear error 507
kaya set uli program using bbsak pero not detect so punta uli ako drive c then aploader kaya pala may password then syempre after remove password set uli ang software at heto ok na ...
Sony Ericsson Xperia X10a Unlock Success
Detected Core ID: 1BA000E1
Detected Core ID: 202400E1
VREF level : 2.59 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Micron 1024Mb
Flash ID : 00002CB3
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
Connect successful.
Opening "C:\Documents and Settings\den_denz\My Documents\Sony Ericsson XPERIA X10a Boot 01-12-2011 19_04_31.bin" file...
Reading BOOT section. Please wait... Done
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson XPERIA X10a TA Backup 01-12-2011 19_04_49.mf".
Unlocking. Please wait... Done
Detected Core ID: 202400E1
VREF level : 2.59 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Micron 1024Mb
Flash ID : 00002CB3
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
Connect successful.
Opening "C:\Documents and Settings\den_denz\My Documents\Sony Ericsson XPERIA X10a Boot 01-12-2011 19_04_31.bin" file...
Reading BOOT section. Please wait... Done
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson XPERIA X10a TA Backup 01-12-2011 19_04_49.mf".
Unlocking. Please wait... Done
Subscribe to:
Posts (Atom)




