Nokia 1280 Lights Final Solution

Trace the cut line here!

Nokia 1600,1112,1110 Another Light Solution [Hardware]

eto procedure ko.......
first.
check light settings, check backlight sa keyboard
check b+ sa coil
next try..
replace coil
last replaced light crystal ic
but negative parin...no luck......


eto ang nakita ko......dadag lang reference ..

eto ung unit ...

Nokia 2630 No signal (Result Unknown) done!!!

History:
-Reprogram/Write PM... (no luck)
-Replace 2n2 and 26MGhz (no luck)
-Replace P.A. (no luck)
-Reheat Signal Parts (no luck)
*REPLACE ANTENNA PAD (DONE!!!)

Ito pala ang SALARIN




Tester ko ang Interface ng Antenna Pad sa ilalim walang reaction, kc putol pala ang lines... (Corroded)



Finished Product

Nokia 1650 Scramble Display [Repaired]

Nokia C3-01 nokia then blink done ( mxkey usb flashing )

UNIT:


NOKIA C3-01 RM-640


PROBLEM:


NOKIA THEN BLINK


TOOL'S:


MXKEY DONGLE

5130 USB CABLE


PROCEDURE:


1. OPEN MXKEY

2. CHOOSE USB METHOD

3. CHOOSE NOKIA SERVICE TOOL

4. PUT MCU, PPM, CNT

5. CLICK FLASH

6. WAIT UNTIL DONE



SCREENSHOT:





BEFORE:










AFTER:








 

Credits goes to windatuin

NOKIA 7230 slide No light in Keypad &LCD

History: Water damaged

 

Nokia 2220s No Signal

Just Replace the Filter

Nokia N5000D-2 Hang

Just follow the Procedure

Nokia 6680 No Lights in LCD and KEYPAD

Just Replace this capasitor

Nokia 1202 Lcd Ways

Just jumper like that.

Credits goes to original uploader!

Nokia 1208 No Lcd and Keypad light

Just a simple trick.

Replace the Two Bulb.

Nokia 5000d No DispLay & No LCD Light

Unit: 5000D

ProbLem: No DisPLay and No LCD Light

History: Water Damage Hindi Shorted/Grounded

Unit Before

Keypad Lang Ang May Ilaw

1st Step:
Try to Change LCD Same Parin

2nd Step:
Trace the Line Lahat (Ok) walang PutoL

So Ito ang Sinubukan kung Gawin

HardWare Pic's Here



After Change that Two Part ( SuccesS ) Light's On



Repair Display & LCD Light ( SuccesS )

DONE

credits goes to original uploader!

Nokia N70 White Screen

Jumper like this

5220 express music done!!!!!

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 307008 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Scanning image files...
Asic CMT: Start programming 41482 KB...
Asic CMT: Erasing rm411__07.23.mcusw
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing area 6...
Asic CMT: Erasing rm411__07.23.ppm_s
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm411__07.23.image_s_blue
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Programming rm411__07.23.mcusw
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming rm411__07.23.ppm_s
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming rm411__07.23.image_s_blue
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Reading Dynamic Camera Configuration ID 1
Updating configuration of camera with ID 1
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: EmergencyNumbers, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ISSVariantActivator, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: Certificates, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 4 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

Flashing with PHOENIX!!!

Nokia 2730c Shorted Done

Unit: 2730c
Problem: Shorted No Signal
Done by jumper

Remove PA

Jumper na...follow image lines



Done.

  

Credits goes to Tsupaeng and pics by Nunuy_rto

Nokia 1800 LCD WAYS SOLUTION

Solution: jumper all lines!

 

Credits goes to original uploader!

Nokia 1800 No light

Problems: No light in LCD and KEYPAD 

Solution: remove the encircled parts then jumper!

TESTED AND PROVEN BY ME!

N5000d-2 whitescreen hang then off DONE in jumper...

problem: pagpower on ng unit after few seconds ng white screen then off

action taken: flash from low to high version no luck

JUMPER THE RED LINE!!!












FINISH! 

Nokia 1800 Backlight Problem Done!

Nokia 1800 Backlight Problem Done!





 



Thanks to original uploader boss Jasper

N70 White Screen and No Lights Done with Simple Trick

N70 White Screen and No Lights Done with Simple Tricks

Unit: Nokia N70

Problem: White Screen and No Lights


Screenshot:









viola pera:




















thanks to original uploader