Samsung Galaxy S3 SPH-L710 Firmware Upgrade Encountered an issue

Firmware Upgrade Encountered an issue Please select recovery mode in Kies and try again



DownLoad

Odin 3.07

SPH-L710 L710VPBMD4 Firmware

How To Start:

- First of all you have to know that updating the firmware of your GS3 SPH-L710 will erase all the saved data on your phone's internal memory, So you need to backup any wanted data before starting any step. (yung iba nabubura lahat pag ganyan problema pero meron din ganyan na problema na hindi nabubura lahat ng nasa phone)

- Charge your phone's battery to be at least at 90%

- Download The Galaxy S3 SPH-L710 USB drivers, Then install it and reboot your PC.

- Download the wanted firmware package L710VPBMD4 and extract it to use it later.

- Download Odin flasher to use it in the update process.

- Get the USB cable of your Samsung Samsung Galaxy S3 SPH-L710 , To use it for connection.

- After you do the above steps you can start the update.

Samsung Galaxy S3 SPH-L710 Firmware Update Steps:

- Turn off your GS3 SPH-L710 , Take its battery, And MMC card out.

- Run Odin.exe

- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.

- Open the extracted firmware folder and you will see one big file inside it:

KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_use r_low_ship.tar

- The files we mentioned are only as example

- Now click on PDA button at Odin's window and select the above firmware file.

- Put the battery into your phone, But do not turn it on.

- To put your GS3 SPH-L710 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.

- Release both keys and press Volume Up key to be in Download Mode.

- Connect the phone to PC using the USB cable.

- Wait until the PC detects and recognizes the phone.

- If your PC starts to install some drivers, Then wait for it to be done.

- Now look at Odin's window to make sure that Odin program detects your phone's Com port.

- You will see something like this 0:[COMxx, When xx are numbers.

- Now you are ready to start updating your GS3 SPH-L710, Just click on Start button.

- Odin will start working and installing the new firmware files on your phone.

- Do not interrupt the process at all, And for any reason.

- Odin will reboot your phone when the update is done.

- If the update was done successfully, You will see PASS! word at Odin's window.

- Disconnect the phone and wait for it to be fully on.

- Do full reset by this code *2767*3855#

- After the phone reboots it will be ready for using, Do the needed settings and enjoy your well done work.










Done