Samsung S3353 Dead Done by Flashtool_E2 and Orginal Firmware

model/unit:
Samsung S3353

problem:
Totally dead


history:
bigla nalang daw po, hindi shorted


tools:
octopus
z3x sam
n5310 usb cable
freesoft Flashtool_E2 (for infineon chips)


kwento ko muna....ganito po nangyari, try ko e-flash sa flashfile na nasa support ng octopus at z3x pero hindi mabuhay kahit alin dun...na try ko na po lahat maliban sa isang naka buhay...

S3353DDJK4_ODDJK3.oct ito po yun,kaso pag press mo ng menu mag rerestart

wala na akung pagpilian....try ko na po ang original firmware,tyaga nalang mag DL hotfile kasi


procedure and link:

Quote:

Make Sure that Infineon USB Drivers is installed on your PC. Run Samsung S3350 Downloader. From Communication Driver drop down menu select: Infineon USB Driver. At the Erases Calibration drop down menu select: Erase whole flash before download. Drag and Drop the file: S3350xxxxx_bin.fls Drag and Drop the file: S3350xxxxx_cds.fls Drag and Drop the file: S3350Oxxxxx.dffs Drag and Drop the file: S3350xxxxx_UI_IMAGE.fls Click Start ( Next in new versions ) button. Click Start USB1 button and connect USB cable to turned off phone with ( * ) Key pressed to Start the Update. Do nothing till the program tells you that the process is Success. Turn the phone on and do full reset by this code: *2767*3855#.

firmware:
SAMSUNG Flash Files ( S ) Series OFW

ito po ginamit ko "S3353DDJK4"



screenshot:

after flashing sa z3x at octopus, check ko narin ang loob baka nabasa pero malinis talaga ang loob...