Samsung Galaxy Ace reboot only revive by octopus..

Samsung Galaxy Ace reboot only,succesfully revive by octopus


Welcome to Octopus Box Samsung software version 1.5.4

Tools
-Octopus box
-Micro usb

-----------------------------------------------------------------------------------

To connect GT-S5830 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in Octopus Samsung software.
Selected firmware file: S5830 LUX S5830XWKPO.oct
Please put your phone in download mode and connect to PC.
To put GT-S5830 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power"+''Home" buttons.
Searching for phone. Please wait...
Found phone on
Firmware write started.
Writing mibib section...
mibib section has been written successfully.
Writing qcsbl section...
qcsbl section has been written successfully.
Writing oemsbl section...
oemsbl section has been written successfully.
Writing amss section...
amss section has been written successfully.
Writing arm11boot section...
arm11boot section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing system.rfs section...
system.rfs section has been written successfully.
Writing data.rfs section...
data.rfs section has been written successfully.
Writing csc.rfs section...
csc.rfs section has been written successfully.
Please, restart phone to apply changes
Firmware writing successfully completed.