Samsung Galaxy Y (young) start up error done

share ko lang po baka makatulong dinala sa akin ng costomer na galaxy y kapag i on mo cya may error sorry d ko nakita anung error unang ginawa ko recover muna same parin factory reset same parin kaya pasya akung re program ko na lang

ito po siya




Files needed:


* Samsung KIES Software o driver
* Odin3 v1.85 Flasher
* FlashFile

Procedure:


* install muna ang samsung kies driver
* open Odin3 v1.85 flasher tapos lagay ang tamang flashfile.. ( para iwas DEADBOOT )

*Firmware Update Steps:

- Check This Options: Re-Partition, Auto Reboot, F.Reset Time

- For PIT file select: totoro_0623.pit

- For BOOTLOADER select: DefaultCalDataWithBoot_S5360xxxxx_REV05.tar.md5

- For PDA select: PDA_S5360xxxxx_REV05.tar.md5

- For PHONE select: MODEM_S5360xxxxx_REV05.tar.md5

- For CSC select: GT-S5360-MULTI-CSC-Oxxxxx.tar.md5


* kunin ang unit 0 handset at ilagay sa download mode

{Press Volume[-] + Home + Power to boot in Download Mode}




* connect usb ( dapat o kung maa-ari walang ibang usb o handset o unit naka-connect )
* kung madetect na ang phone click or hit START button sa Odin3 flasher
* hintayin matapos at automatic magre-start ang handset

Quote:

<ID:0/080> Added!! <ID:1/081> Added!! <ID:1/081> Removed!! <ID:0/080> Removed!! <ID:0/080> Added!! <ID:1/081> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5360XXKI6_REV05.tar.md5 is valid. <OSM> PDA_S5360XXKI6_REV05.tar.md5 is valid. <OSM> MODEM_S5360XXKI6_REV05.tar.md5 is valid. <OSM> GT-S5360-MULTI-CSC-OXXKI6.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/080> Odin v.3 engine (ID:80).. <ID:1/081> Odin v.3 engine (ID:81).. <ID:0/080> File analysis.. <ID:1/081> File analysis.. <ID:0/080> SetupConnection.. <ID:1/081> SetupConnection.. <OSM> All threads completed. (succeed 0 / failed 2) <ID:1/081> Removed!! <ID:0/080> Removed!! <ID:0/082> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5360XXKI6_REV05.tar.md5 is valid. <OSM> PDA_S5360XXKI6_REV05.tar.md5 is valid. <OSM> MODEM_S5360XXKI6_REV05.tar.md5 is valid. <OSM> GT-S5360-MULTI-CSC-OXXKI6.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/082> Odin v.3 engine (ID:82).. <ID:0/082> File analysis.. <ID:0/082> SetupConnection.. <ID:0/082> Initialzation.. <ID:0/082> Set PIT file.. <ID:0/082> DO NOT TURN OFF TARGET!! <ID:0/082> Get PIT for mapping.. <ID:0/082> Firmware update start.. <ID:0/082> BcmBoot.img <ID:0/082> NAND Write Start!! <ID:0/082> HEDGE_NVRAM8_RF_LE.bin <ID:0/082> sysparm_dep.img <ID:0/082> Sbl.bin <ID:0/082> boot.img <ID:0/082> system.img <ID:0/082> userdata.img <ID:0/082> param.lfs <ID:0/082> BcmCP.img <ID:0/082> Transmission Complete.. <ID:0/082> Now Writing.. Please wait about 2 minutes <ID:0/082> Receive Response form LOKE <ID:0/082> csc.rfs <ID:0/082> RQT_CLOSE !! <ID:0/082> RES OK !! <ID:0/082> Completed.. <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/082> Removed!! <ID:0/080> Added!! <ID:1/081> Added!! <ID:1/081> Removed!! <ID:0/080> Removed!!

done